DMA setup

What goes on each PC and what to check before loading.

Your gaming PC runs the game. Your second PC runs the DMA loader and cheat. The DMA card sits in the gaming PC and connects to the second PC through its data port.

What you need#

• A Windows 10/11 64-bit gaming PC and a separate Windows 10/11 64-bit second PC.
• A DMA card and firmware that match your setup.
• A stable USB data connection to the second PC. Use a direct USB 3 port rather than a hub.
• An active license and the current DMA Loader from Downloads.
• Internet access on the second PC for login, license checks, and downloads.

Check the current product requirements with support before buying a card or flashing different firmware.

Connect the PCs#

1. Shut down both PCs before installing or moving the PCIe card.
2. Seat the card in the gaming PC and connect its data cable to the second PC.
3. Start the gaming PC and let Windows finish loading, then start the second PC.
4. Open the DMA loader on the second PC and sign in.
5. Run the loader's DMA Speed Test before loading a new setup.

Keep other DMA tools closed during the test. If the card will not open or reads fail, use DMA connection fixes.

Load your cheat#

1. Check Status and select the right product.
2. Open the game on the gaming PC and wait at its menu or lobby.
3. Load once from the second PC and wait for the result.

Start with the normal map handling. Use the MMAP guide when you actually need a custom map.